6 Tell-tale Signs Your Sump Pump Needs Attention!!

6 Tell-tale Signs Your Sump Pump Needs Attention!!

According to a report by the American Society of Home Inspectors, around 60 percent of American residences face issues such as basement wetness. And as you know, it doesn’t take much water to wreak havoc on basements, leading to damages worth thousands of dollars. Moreover, a wet basement can lead to mold and mildew, which can cause several health issues in the home.

These are why sump pumps are so standard in American homes, especially those lying in low-lying areas and places that experience flooding after heavy snowfall. The sump pumps dry the basement of a building by regularly pumping out the flood water accumulated in the basement.

Sump Pump Problems You Shouldn’t Be Ignoring

As we mentioned earlier, a wet basement can cause substantial property damage. Therefore, it is not only essential to install a sump pump, but it’s also crucial to ensure that your sump pump is working fine. But since sump pumps are installed in the basement, they often tend to go unnoticed, and usually, homeowners don’t take cognizance of a sump pump issue until it’s too late. So, it is advisable to inspect sump pumps regularly. Also, call a plumber in Norwalk, CA, as soon as you witness any of the below-mentioned issues with your sump pump.

Your Sump Pump is Running Continuously

If your sump pump runs continuously, it’s a sign that something is wrong. This may happen because of a stuck float switch. Check the float switch to ensure it’s not tangled or clogged. The issue might also arise if the sump pump is too small for the sump pit, requiring the sump pump to work too hard to pump out the water. In this case, you may have to call a plumber for a new sump pump installation in La Mirada. Another reason for the sump pump to run continuously can be a broken check valve that’s unable to prevent the pumped-out water from flowing back into the pit.

Your Sump Pump is Making Weird Noises

It’s normal for a sump pump to make a low humming noise when in operation or a thumping noise when it shuts down. But if your sump pump is making any unusual sound, such as a loud humming noise or any grinding and rattling noise, it might indicate that your pump has a problem. Usually, the noise is caused due to frozen discharge pipes or a destructive or jammed impeller. It’s best to let a professional handle such issues. We advise contacting a licensed plumber in La Mirada, CA to inspect your sump pump at the earliest.

There’s No Water in the Sump Pit

Most sump pumps are installed in specially constructed sump pits connected to a building’s basement drainage system. But sometimes, due to improper sump pump installation, you might notice that despite your pump running fine, there’s no water in the pit. The issue might also occur because the sump pump is not correctly hooked to the drainage system. Another reason for a dry sump pit could be clogged, collapsed, or incorrectly installed drain tile preventing water from reaching the sump pit. We suggest you disconnect the sump pump and contact a plumber in Norwalk, CA, to schedule a sump pit inspection.

Your Sump Pump Won’t Turn On

A faulty float switch or a jammed impeller is one of the most common reasons for a sump pump not turning on. First, check if there’s power, and then try turning on the float switch manually. If that doesn’t work, the problem could be with the impeller. Next, check if the impeller is clogged. If you find any debris jamming the impeller, clean it to unclog it. You can also schedule a plumber visit in Norwalk to inspect your sump pump.

Your Sump Pump is Vibrating More Than Usual

While it’s normal for a sump pump to vibrate when in operation, an excessively vibrating sump pump could indicate that either there’s a mechanical problem or the motor is too overworked. One of the reasons for an overworked motor is that the water inflow rate is much more than the rate at which the sump pump can pump out the water. The only solution in this scenario is to call an expert for a new sump pump installation in La Mirada, CA. Sometimes a sump pump might vibrate excessively because of a clogged drain line. Get the drain lines inspected by a Norwalk plumber to fix the issue.

There’s Rust on Your Sump Pump

Though sump pumps are designed to work with water, constant exposure to water might lead to excess rust around the battery terminals. If left untreated, the rust may eventually clog the plumbing and reduce the sump pump’s life. Therefore, it is advisable to maintain the sump pump and have it serviced regularly.

If you are facing any issue with your sump pump and need help, contact us at Power Pro Plumbing. To schedule an appointment, call us at (866) 627-9647. You can also book an appointment online and get a special $25 for online booking.

Recent Posts

AC Tune Up

The Benefits of AC Tune-Up Services in Long Beach

Long Beach, California, experiences warm weather throughout the year, making it essential for homeowners to maintain a reliable and efficient air ...
Read More
Shut-Off Valve

Signs Your Earthquake Shut-Off Valve Needs Maintenance or Replacement

Located in an earthquake-prone region like California, it’s vital to ensure that your home’s earthquake shut-off valve is functioning properly. This ...
Read More
Air Filter Replacement

A Deeper Look into the Environmental Benefits of Air Filter Replacement

Air filter replacement is an integral part of air conditioning system maintenance, often overlooked yet critical for maintaining good indoor air ...
Read More
Scroll to Top