Review Us On

My Water Heater Stopped Working – Why?

My Water Heater Stopped Working – Why?

Unlike old-fashioned water heaters, modern ones are built to last. Extended warranties often back them, and you hope they will remain trouble-free for many years to come. Unfortunately, the water heaters sometimes fail or are part of their essential components, inevitable. Look for some reliable water heater repair in Long Beach, CAand get your water heater checked.  

Keeping your water heater in good shape is to identify and resolve potential issues as early as possible. Water heaters go out for many different reasons. You need to know some of the most common ones.

Your Water Heater isn’t Working. Why?

  • There is a Problem With The Thermostat.

Ensure that your thermostat is set at the right temperature before concluding that your water heater is broken. The ideal temperature range is 120° to 140° Fahrenheit. However, the temperature does not change whenever you adjust the thermostat, and you may need to replace the thermostat with a new one.

  • A Leaky or Damaged in-line Valve.

A loose in-line valve often causes leaks from water tanks. Water is activated or deactivated using this handle at the top of the tank. First, the ball or in-line valve must be secured in its location by tightening the nut that holds it. After tightening the valve, a new in-line water heater valve will have to be purchased from your local hardware store if the leak becomes more severe.

  • The Ignition System is Dirty.

Electronic ignitions are sometimes used in place of pilot lights in water heater in Cerritos, CA. Despite the impressive resilience of the pilot light, electronic systems can often provide close to perfect reliability.

It is possible, however, for electronic ignition systems to malfunction. For example, a sensor determines when to turn on and ignite the gas in your electronic ignition water heater. Even when the ignition itself is functioning correctly, a faulty sensor can cause it to stop working. However, if you clean the sensor, you can enjoy your hot water once more at a low cost and in a short time.

  • A Damaged Pressure Relief Valve.

Water pressure is maintained in the water tank by releasing excess pressure through the pressure relief valve. In the event of damage to this valve, leaking can occur, in which case the pressure relief valve must be replaced.

  • Crack in the Dip Tube.

The dip tube transports cold water to its base to heat the water in the tank. In the event of damage to the dip tube in a crack or hole, water heating can be reduced. As a result, you will experience premature cold water release in your showers and faucets.

  • The Buildup of Sediment.

Over time, excess minerals built up can also cause your water heater to stop providing hot water. Minerals such as calcium and magnesium can collect at the base of water tanks, taking up space for storing hot water.

Consequently, your supply of hot water will be reduced. However, this problem is easily fixed since everything needs to be flushed out of the water heater. Contact experts for heating services in Cerritos, CA.

The experts at Power Pro Plumbing can help you with water heater repair if you are experiencing problems with your water heater. Please book an appointment with us today to learn more about our affordable services. You can reach us at (866) 627-9647 or email at contactus@powerproplumbing.com

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
Scroll to Top