Have you ever hoped to be welcomed by the warm air from your furnace, only to realize that it’s nearly as cold inside as it was outdoors? During winters, there’s nothing as irritating as a furnace that won’t turn on instantly! That’s why you need to get Anaheim, CA heating and air conditioning services.
Reasons Your Furnace Isn’t Turning On
You shouldn’t be abandoned if the bone-chilling if this happens to you, so today we’re going to assist you to figure out what to do by answering your biggest query, “Why is my furnace not kicking on?”
- Check the Air Filters: Very filthy filters can totally block airflow. Replace or clean HVAC filters as required and ensure all of the vents in your residence are open and free of impediments.
- Ensure the System Is On: You may not know that your heater has a power switch located on the system. Ensure the switch is turned on. Moreover, look inside your electrical panel to make sure the breaker that supplies power to your unit is in the “On” position.
- Check the Power: Regardless of the kind of fuel that you utilize to power your furnace, it requires electricity. You must ensure that the fuse which powers your system has not tripped. Make sure that the power cord is not broken, and the power switch is in the “on” position. If you see that the control board of the heating system is slightly burnt, there might be an electrical short. You have to contact an expert to repair the issue.
- The Blower Component: If there is an issue with the furnace’s blower part, your furnace will not turn on. Most units have an inspection window and if you see through the window and the light is green, then your blower is working appropriately. If the light is not lit up or it is red, it is a danger sign for which you should call an adept expert to book a heating repair in Long Beach, CA.
- Check the Pilot Light: A filthy or defective pilot light is one of the primary reasons a gas furnace won’t kick on. The majority will leave this issue to the specialists but if you have mechanical expertise, you may fix the problem yourself. Begin by turning off the power, open the panel on the front of the system and find the pilot light and remove the pilot light from the system. Gently clean the pilot light properly with medium-grain sandpaper to eliminate any junk. Reattach it, replace the panel, restore power and return the unit’s gas flow. If the furnace still doesn’t operate, it’s time to reach out to the experts.
Try these simple fixes first in an attempt to get your unit up and running in as short an amount of time as possible. If your unit still does not operate properly, contact us for an inexpensive repair.
Are you looking for a water heater repair in Long Beach, CA? Look no further than Power Pro Plumbing? To book our expert and affordable HVAC services, you can call us now at (833) 212-2124 or drop us an email at [email protected].
